MULTI-IMAGE PRINT
FRAMING SUGGESTION

20" x 16" Standard Frames

Although these prints will fit straight into an A3 frame another good option is to obtain a mount and use a standard 20 in x 16 in frame, which are widely available in various styles from many high street stores, such as Wilko's and The Range, at very reasonable prices.

Below are a couple of examples of how the prints could look using different combinations of mounts and frames. These are only a rough guide and it is up to the purchaser to decide what would work best for them!

The easiest option may be to get a cut mount from a local framer, but if you wish mountboards can be obtained from local craft shops. The colours shown below are based on boards made by Daler Rowney, with an aperture of 408 mm x 285 mm.

 

Multi Image Print Framed

Silverspacer/spacerGrey Frame with a Dawn Grey Daler Board Mount
spacer

Multi Image Print Framed

Black Frame with a Dawn Grey Daler Board Mount
spacer

Multi Image Print Framed

Gold spacer/spacerBrass Frame with a Wedgwood Grey Daler Board Mount
spacer